HANDS ON TEST DRIVE OF NOOK EREADER

I stopped by Barnes & Noble to test drive the Nook eReader device that we have all been hearing so many good things about. Here’s a 3-part short video series where I point out a few of the advantages and disadvantages of this device. Overall, I give it a passing score as an eReader. The beta Internet browser that is included is a nice extra, but will take some tweaking before it can really be considered as something useful. That being said, check out the videos and post your comments below!

by Carlton Flowers
Gadget Geek Extreme

Tweet This Post

TEXT REFLOW SEEMS STANDARD FOR ANDROID OS… WHY NOT iOS4?

“Text Reflow”, or the function of word wrapping text when you zoom in on an article using your smart phone browser, seems to be a normal feature on Android smart phones these days. But this is lacking on the iPhone iOS4 platform. I am a heavy article reader, and I rely on my iPhone 4 to keep up-to-date with trends within the fields that I do business.

A major annoyance to me is the need to scroll horizontally to read articles when zooming in using the Apple’s Safari browser. When I pick up an Evo 4G or a Droid X, the text automatically re-wraps itself beautifully when you zoom in on an article or document. This is especially handy for those that like to speed read. In fact, you can download several programs on the net that basically provide the function of flashing text in groups of 2 or 3 words at a time to facilitate rapid reading. When you zoom in using an Android device, you can increase the text size as much as you want and it will reformat the text to allow vertical reading. You can easily flick down the page and rapidly read any article much faster than you could be scrolling sideways.

The folks over at Apple seem to think that text reflow is not necessary because the Retina display is so clear that you don’t need to zoom in on text to ease reading. I don’t understand this argument, and I think it’s an excuse to get around the fact that the Android platform has outdone iOS4 in this one single area. It doesn’t matter how clear the screen might be. If you can’t read tiny text on a printed document because of poor eyesight, you’re not going to be able to read it on a Retina display either. So you are left to zooming in to a decent size, and having to scroll back and forth horizontally to get through an article. It is very cumbersome to say the least.

Text reflow is almost a deal-breaker for me. I absolutely love my iPhone 4, but I would consider trying to get out of my contract and sell my device just to be able to have a device that I could use to speed read information in the manner that text reflow allows. I’m not a programming expert or software developer, but I would have to assume that this is an easy fix (or addition) for the Apple developers. In order to stay ahead of the competitors (who seem to be catching up rapidly), why not put the Apple ego aside and get this done?

I have started a blog page dedicated to drumming up support for text reflow on iOS4. If you are an iPhone user and you see the benefit of having text reflow for reading purposes, please click on the link and post a response on my blog page. I want my iPhone 4 to be my primary reading device, and I’ll do just about anything to have this feature!

Carlton Flowers
Techno Geek

http://carltonzone.com/blog/iphone-text-wrapword-re-flow-discussion-page/

UPDATE! I have found a temporary solution to the text reflow issue with the Safari browser! Read about it in my latest blog post here:

http://carltonzone.com/blog/quasi-text-reflow-on-an-iphone/

Tweet This Post

REPLACEMENT IPHONE DIGITIZER CALIBRATION ISSUE

A few months ago, I dropped my iPhone 3GS and destroyed the glass display. It still worked, which was a miracle, but the glass was shattered with cracks running throughout. I decided to look into replacing the broken glass display, which is called the “digitizer“, on my own. I ran into problems, and found that there wasn’t much information that I could dig up on this issue on the Internet. I’m starting this blog post to provide people with my findings and share what I found to be the problem.

I purchased a replacement digitizer on Amazon.com for $11 including shipping. I was not expecting to be able to get one that cheap, but they are evidently selling a pile of these things and are able to price them cheaply. All of the replacements that I found claim that they work on both the iPhone 3G and the iPhone 3GS.

I watched several of the videos available on YouTube that show you how to disassemble the phone and install the new digitizer. All of them claim that the process is easy, and only takes around 20 minutes to a half hour to complete. Being that I am an experienced computer builder and hacker, I thought this would be an easy task to take on.

I received the replacement digitizer in the mail within one week, and I was ready to attempt the replacement. I made a couple of big mistakes. First, I tried to pry the iPhone apart from the antenna seam, NOT from the glass display at the surface. I ended up damaging the speaker, and killing the phone’s vibration capability, but it still worked otherwise.

The second mistake I made was not being careful enough when prying the digitizer away from the sensitive LCD display. If you put too much pressure on the LCD with the prying tool that comes with the replacement digitizer kit, you will ruin it. I pried too hard and ended up losing about a one inch square’s worth of display space when I reassembled the phone and turned it back on. I would caution anyone to be extra careful when removing the digitizer glass from the bracket and LCD display. The videos did not stress this enough.

As a side note, I have to mention how difficult it was to remove the old digitizer from the bracket that holds it inside the phone. You have to use a hair dryer to blow heat on the glass for about 10 minutes to get the glue soft enough that will allow you to pry the glass off of the bracket where it is glued on the top and bottom portions of the screen. That was not an easy task, and it was a very disconcerting feeling trying to pry it apart after heating it up. But getting back to the story…

After reassembling the phone and seeing that I heavily damaged the LCD, I did not notice the impending problem I was going to have with the touch screen not being in sync with my finger. I had to order a replacement LCD panel from Amazon.com for about $35. Once the new one came in, I put the phone back together with the new digitizer. I fired up the phone and had a perfect display, to my great excitement! But the celebration didn’t last long when I noticed that I couldn’t get the slider to move across the screen to unlock the phone. I fiddled with it for several minutes until I noticed that I had to touch the screen 1/2″ above the slider button to get it to “grab”. Once I got the phone unlocked and on the home screen, I noticed that all of the buttons were off-base. You’d touch one icon, but it would activate the one to the right, and up one row. All of the icons were off, and there is no way to calibrate the screen to fix this. I also noticed that the bottom row was off, but in a different way. Instead of being out of sync to the right and up one notch, it was just to the right. The bottom home row evidently is handled in a different way than the icons as far as iOS works.

I searched and searched on the Internet and found only 2 or 3 obscure blog posts where others had described having the same problem. I surmised that the digitizer was no good, so I sent it back for a replacement. The replacement came in, and I had the same exact problem. That’s when I really started to dig. I found exactly one post on a blog that a person made reference to what could be causing this problem. The person stated that the digitizer for the 3G is not compatible with the 3GS version. I don’t know if this is true or not, but it is the only possible answer that I have found to date.

I got frustrated with trying to find a solution to the problem, so I packaged up my 3GS, all of my accessories, the 2 replacement digitizers, and sold it all on eBay for $180. The broken digitizer still worked, so I took off the replacement and put it back on so the buyer could get the phone loaded and jailbroken. The buyer had plans to unlock the phone and use it on the Verizon network. I used the proceeds to cover my cost of an early upgrade to the iPhone 4, which I absolutely love.

Since going through this ordeal, I have come across several people with cracked iPhone displays asking me for advice on replacing them. I’d like to find out more about this calibration problem before I recommend a course of action for anyone. If you have had any experience in repairing iPhones, or if you know of a person who has some insight on this syncing issue, please post a reply below. I’d really like to get a good discussion going on this!

Carlton Flowers
Techno Geek Extraordinaire

Tweet This Post